Farmet
Softer NS
Linkage
Precise deep guiding and excellent stability
The main advantage of the disc plough-harrow Softer is a universal usage from the first stubble breaking to subsequent pre-sowing preparation of the soil after the breaking or ploughing. This design is simple with increased resistance and the short structure of the machine results in precise deep guiding, excellent stability at work and effective quick turning at headlands.
Strong Scalloped Disc Blades
Discs with the diameter of 510 / 560 mm are located in two rows. For the case of contact with an obstacle, each disc is separately effectively protected by means of rubber mounting.
The discs are placed in maintenance-free bearings with excellent service life. Optimum geometry of discs ensures high-quality work with very good productivity and high percentage of incorporated plant residues. The discs retain ideal working angle even with partially worn geometry of discs. The disc spacing of 24 cm ensures good free flow of plant residues.
Disks with the diameter of 510 mm / 560 mm located in two rows will undercut the soil. Working depth is 5-12 cm.
Clods are crumbled by the rear roller.
Robust Design
High-strength refined materials in connection with eXtra STEEL line technology guarantee long service life of our machines even in the most difficult conditions.
- Maintenance-free placement of the discs.
- Maintenance-free rubber mounting.
High-strength materials
High-strength refined materials used for crucial nodes to ensure long service life. Strongly dimensioned frame of high-strength steel.
Maintenance-free placement of discs
Maintenance-free placement of the discs ensuring operation of the machine with no need of additional lubrication.
Maintenance-free rubber mounting
Resistant and maintenance-free rubber mounting for adaptation to terrain with protection against overload.
Easy Operation
Due to minimum of adjusting and lubricating points the operation and subsequent maintenance are very easy steps that anybody can perform.
- Minimum of adjustment points.
- Minimum of lubrication points.
- No angles adjustments or translation of discs are needed.
Continuous connection of runs
The extreme disc is separately height-adjustable which allows continuous connection of runs.
Direction of the processed soil
The height and longitudinally adjustable side deflector for ideal direction of the processed soil.
Adjustment of working depth
Easy and continuous adjustment of the working depth using the pins on the coupling bars of rollers in disc plough-harrows Softer 4,5 NS and Softer 6 NS. (substitutable by hydraulic control – optional).
Adjustment of working depth
Easy adjustment of the working depth using the pins on the roller beams of Softer 3 N.
Smartly designed machine
The advantage of this machine is its multipurposeness and adjustability bringing high variability of work.
- Skilful when working in the field due to a short compact design.
- Light construction of the machine with no need of weighing down results in low operating costs.
- Very good self-cleaning capabilities of the space between the disk and the plate for fixing the disc.
Full-perimeter disc edges
Easier disc soil penetration.
Piston rod cover
The cover of the piston rod controlling the rollers and distance washers against stones flying off the rear disks. (optional equipment for Softer 4,5 NS and Softer 6 NS – hydraulic control of rollers)
Full-perimeter disc edges
The sophisticated design of the machine allows for an installation of the Micro Drill Seeding Unit for sowing catch crop or for planting grass directly.
SynCult Manure Applicator
Complete set of additional equipment for the Softer NS Disc Cultivator for all-area application of manure.
FARMET | SOFTER NS Specifications
| Softer 2.5N | Softer 3N | Softer 3.5N | Softer 4.5NS | Softer 5NS | Softer 6NS | |
|---|---|---|---|---|---|---|
| Working width | 2400mm | 2900mm | 3500mm | 4500mm | 5000mm | 6000mm |
| Transport width | 2500mm | 3000mm | 3500mm | 3000mm | 3000mm | 3000mm |
| Transport height | 1370mm | 1370mm | 1370mm | 2500mm | 3000mm | 3300mm |
| Total machine length | 2500mm | 2500mm | 2500mm | 2700mm | 2700mm | 2700mm |
| Working depth | 35 - 120mm | 35 - 120mm | 35 - 120mm | 35 - 120mm | 35 - 120mm | 35 - 120mm |
| Number of disks – Front row | 10 | 12 | 14 | 19 | 21 | 25 |
| Number of disks – rear row | 12 | 10 | 14 | 19 | 21 | 25 |
| Diameter of disks | 510 / 560mm | 510 / 560mm | 510 / 560mm | 510 / 560mm | 510 / 560mm | 510 / 560mm |
| Working Performance | 2.5 - 3.8 ha/h | 3 - 4.5 ha/h | 3 .5- 5.3 ha/h | 4.5 - 6.75 ha/h | 5 - 7.5 ha/h | 6 - 9 ha/h |
| Towing vehicle1 |
65 - 100 kW 90 - 140 HP |
80 - 120 kW 110 - 165 HP |
90 – 140 kW 120 – 190 HP |
120 - 180 kW 160 - 240 HP |
130 - 190 kW 175 - 255 HP |
150 - 225 kW 200 - 300 HP |
| Working speed | 10 - 15 km/h | 10 - 15 km/h | 10 - 15 km/h | 10 - 15 km/h | 10 - 15 km/h | 10 - 15 km/h |
| Maximum transport speed | 25 km/h | 25 km/h | 25 km/h | 25 km/h | 25 km/h | 25 km/h |
| Maximum slope availability | 11° | 11° | 11° | 11° | 11° | 11° |
|
Number of hydraulic circuits/pressure | - | - | - | 2(4)/ISO 12.5 | 2(4)/ISO 12.5 | 2(4)/ISO 12.5 |
| Number of hydrocouples | - | - | - | 1(2)/200 BAR | 1(2)/200 BAR | 1(2)/200 BAR |
| Tractor hitch requirement | TPH cat. 2 and 3 | TPH cat. 2 and 3 | TPH cat. 2 and 3 | TPH cat. 3 | TPH cat. 3 | TPH cat. 3 |
| Machine Weight2 | 1400kg | 1540kg | 1950kg | 2950kg | 3150kg | 3650kg |
1 Recommended towing vehicle, the actual pulling force may significantly change according to the processing depth, soil conditions, inclination of land, wear of working members and their adjustment.
2 Machine weight with LTX roller.
N – carried machine
NS – carried foldable machine
Contact Serafin Machinery's sales team
Want to talk about customisiation, or just have a few questions?
Don’t hesitate to get in touch with our sales team.
