Precise deep guiding and excellent stability
The main advantage of the disc plough-harrow Softer is a universal usage from the first stubble breaking to subsequent pre-sowing preparation of the soil after the breaking or ploughing. This design is simple with increased resistance and the short structure of the machine results in precise deep guiding, excellent stability at work and effective quick turning at headlands.
Disks with dentate circumference
Disks with the diameter of 510 / 560 mm are located in two rows. For the case of contact with an obstacle, each disk is separately effectively protected by means of rubber mounting.
The disks are placed in maintenance-free bearings with excellent service life. Optimum geometry of disks ensures high-quality work with very good productivity and high percentage of incorporated plant residues. The disks retain ideal working angle even with partially worn geometry of disks. The disk spacing of 24 cm ensures good free flow of plant residues.
Disks with the diameter of 510 mm / 560 mm located in two rows will undercut the soil. Working depth is 5-12 cm.
Clods are crumbled by the rear roller.
High-strength refined materials in connection with eXtra STEEL line technology guarantee long service life of our machines even in the most difficult conditions.
High-strength refined materials used for crucial nodes to ensure long service life. Strongly dimensioned frame of high-strength steel.
Maintenance-free placement of disks
Maintenance-free placement of the disks ensuring operation of the machine with no need of additional lubrication.
Maintenance-free rubber mounting
Resistant and maintenance-free rubber mounting for adaptation to terrain with protection against overload.
Due to minimum of adjusting and lubricating points the operation and subsequent maintenance are very easy steps that anybody can perform.
Continuous connection of runs
The extreme disk is separately height-adjustable which allows continuous connection of runs.
Direction of the processed soil
The height and longitudinally adjustable side deflector for ideal direction of the processed soil.
Adjustment of working depth
Easy and continuous adjustment of the working depth using the pins on the coupling bars of rollers in disk plough-harrows Softer 4,5 NS and Softer 6 NS. (substitutable by hydraulic control – optional).
Adjustment of working depth
Easy adjustment of the working depth using the pins on the roller beams of Softer 3 N.
Smartly performed designed machine
The advantage of this machine is its multipurposeness and adjustability bringing high variability of work.
Full-perimeter disc edges
Easier disc soil penetration.
Piston rod cover
The cover of the piston rod controlling the rollers and distance washers against stones flying off the rear disks. (optional equipment for Softer 4,5 NS and Softer 6 NS – hydraulic control of rollers)
Full-perimeter disc edges
The sophisticated design of the machine allows for an installation of the Micro Drill Seeding Unit for sowing catch crop or for planting grass directly.
SynCult Manure Applicator
Complete set of additional equipment for the Softer NS Disc Cultivator for all-area application of manure.
FARMET | SOFTER NS Specifications
|Softer 2.5N||Softer 3N||Softer 3.5N||Softer 4.5NS||Softer 5NS||Softer 6NS|
|Total machine length||2500mm||2500mm||2500mm||2700mm||2700mm||2700mm|
|Working depth||35 - 120mm||35 - 120mm||35 - 120mm||35 - 120mm||35 - 120mm||35 - 120mm|
|Number of disks – Front row||10||12||14||19||21||25|
|Number of disks – rear row||12||10||14||19||21||25|
|Diameter of disks||510 / 560mm||510 / 560mm||510 / 560mm||510 / 560mm||510 / 560mm||510 / 560mm|
|Working Performance||2.5 - 3.8 ha/h||3 - 4.5 ha/h||3 .5- 5.3 ha/h||4.5 - 6.75 ha/h||5 - 7.5 ha/h||6 - 9 ha/h|
65 - 100 kW|
90 - 140 HP
80 - 120 kW|
110 - 165 HP
90 – 140 kW|
120 – 190 HP
120 - 180 kW|
160 - 240 HP
130 - 190 kW|
175 - 255 HP
150 - 225 kW|
200 - 300 HP
|Working speed||10 - 15 km/h||10 - 15 km/h||10 - 15 km/h||10 - 15 km/h||10 - 15 km/h||10 - 15 km/h|
|Maximum transport speed4||25 km/h||25 km/h||25 km/h||25 km/h||25 km/h||25 km/h|
|Maximum slope availability||11°||11°||11°||11°||11°||11°|
Number of hydraulic|
|-||-||-||2(4)/ISO 12.5||2(4)/ISO 12.5||2(4)/ISO 12.5|
|Number of hydrocouples/type3||-||-||-||1(2)/200 BAR||1(2)/200 BAR||1(2)/200 BAR|
|Tractor hitch requirement||TPH cat. 2 and 3||TPH cat. 2 and 3||TPH cat. 2 and 3||TPH cat. 3||TPH cat. 3||TPH cat. 3|
1 Recommended towing vehicle, the actual pulling force may significantly change according to the processing depth, soil conditions, inclination of land, wear of working members and their adjustment.
2 Machine weight with LTX roller.
3 By default, 1 folding circuit, but optional hydraulic control of rollers, then 2 circuits.
4 Transport / brake system: Follow national provisions valid for transport of machines on public roads. Verify legal provisions valid in the country, regulations on maximum allowable total weights and axle loads and also on necessary possible use of the brake system. If you have any questions, please contact our sales representative.
N – carried machine
NS – carried foldable machine
Contact Serafin Machinery's sales team
Want to talk about customisiation, or just have a few questions?
Don’t hesitate to get in touch with our sales team.